Model Builder Radio Comms Model Tutorial
Interface Control Definition
The following is the ICD file for the sample model:
| Name | Description | Type | Pkt | Offset | Size |
|---|---|---|---|---|---|
| Op1_Volume | Operator 1 overall volume control
Range 0.0 - 1.0 |
In_Float | RX1 | 0..3 | 4 bytes |
| Op1_Sidetone | Operator 1 sidetone volume
Range 0.0 - 1.0 |
In_Float | RX1 | 4..7 | 4 bytes |
| Op1_Power | Operator 1 power enable
Logical, True = On |
In_Bool | RX1 | 8 | bit0 (x01) |
| Op1_PTT_Input | Operator 1 PTT input
Logical, True = PTT selected |
In_Bool | RX1 | 9 | bit0 (x01) |
| Op1_TX_Select | Operator 1 radio transmit select
Logical, True = radio selected to TX |
In_Bool | RX1 | 10 | bit0 (x01) |
| Op1_IC_Select | Operator 1 intercom select
Logical, True = intercom selected |
In_Bool | RX1 | 11 | bit0 (x01) |
| Op1_Stall_Enbl | Operator 1 stall warning enable | In_Bool | RX1 | 12 | bit0 (x01) |
| Op1_Radio_Vol | Operator 1 radio volume
Range 0.0 - 1.0 |
In_Float | RX1 | 13..16 | 4 bytes |
| Op2_Volume | Operator 2 overall volume control
Range 0.0 - 1.0 |
In_Float | RX1 | 17..20 | 4 bytes |
| Op2_Sidetone | Operator 2 sidetone volume
Range 0.0 - 1.0 |
In_Float | RX1 | 21..24 | 4 bytes |
| Op2_Power | Operator 2 power enable
Logical, True = On |
In_Bool | RX1 | 25 | bit0 (x01) |
| Op2_PTT_Input | Operator 2 PTT input
Logical, True = PTT selected |
In_Bool | RX1 | 26 | bit0 (x01) |
| Op2_TX_Select | Operator 2 radio transmit select
Logical, True = radio selected to TX |
In_Bool | RX1 | 27 | bit0 (x01) |
| Op2_IC_Select | Operator 2 intercom select
Logical, True = intercom selected |
In_Bool | RX1 | 28 | bit0 (x01) |
| Op2_Stall_Enbl | Operator 2 stall warning enable | In_Bool | RX1 | 29 | bit0 (x01) |
| Op2_Radio_Vol | Operator 2 radio volume
Range 0.0 - 1.0 |
In_Float | RX1 | 30..33 | 4 bytes |
| Op1_Radio_Freq | Operator 1 radio frequency
Input in MHz, output is scaled into Hz |
In_Float | RX1 | 34..37 | 4 bytes |
| Op1_Rad_Squelch | Operator 1 radio squelch level
Range 0.0 - 1.0 |
In_Float | RX1 | 38..41 | 4 bytes |
| Op2_Radio_Freq | Operator 2 radio frequency
Input in MHz, output is scaled into Hz |
In_Float | RX1 | 42..45 | 4 bytes |
| Op2_Rad_Squelch | Operator 2 radio squelch level
Range 0.0 - 1.0 |
In_Float | RX1 | 46..49 | 4 bytes |
| Radio1_Altitude | Radio 1 altitude above mean sea level
Altitude is supplied in Meters |
In_Float | RX1 | 50..53 | 4 bytes |
| Radio1_Latitude | Radio 1 latitude in degrees
Radio1_Lngitude Radio 1 longitude in degrees |
In_Float | RX1 | 54..57 | 4 bytes |
| Radio1_Lngitude | Radio 1 longitude in degrees | In_Float | RX1 | 58..61 | 4 bytes |
| Radio2_Altitude | Radio 2 altitude above mean sea level
Altitude is supplied in Meters |
In_Float | RX1 | 62..65 | 4 bytes |
| Radio2_Latitude | Radio 2 latitude in degrees
Radio2_Lngitude Radio 2 longitude in degrees |
In_Float | RX1 | 66..69 | 4 bytes |
| Radio2_Lngitude | Radio 2 longitude in degrees | In_Float | RX1 | 70..73 | 4 bytes |
| ATIS_Altitude | ATIS radio altitude above mean sea level
Altitude is supplied in Meters |
In_Float | RX1 | 74..77 | 4 bytes |
| ATIS_Latitude | ATIS radio latitude in degrees | In_Float | RX1 | 78..81 | 4 bytes |
| ATIS_Lngitude | ATIS radio longitude in degrees | In_Float | RX1 | 82..85 | 4 bytes |
Model Builder Stuff